Phase Controller Reverse

C-R00-11-DL00

The Reverse Phase Controller is a great wireless solution to control decorative LED luminaries such as pendants and sconces via Bluetooth® mesh.

The Reverse Phase Controller is the ideal solution for standalone projects as well as the backbone of complex Mesh Networks.

Oops, that's an error. Try refreshing

For more information please open this page in the HubSpot page editor.

Product Option Table

This product has no options.

Login to HubSpot to get started.

Login or contact sales to view pricing.

Technical Description

The C-R00-11-DL00 Reverse Phase Controller dims on VAC. Once powered up, the device broadcasts its identification code waiting to be provisioned through the Bubblynet App. It allows to control a wide variety of loads. This device has been tested with different sources and resulted in proper performance. Full and proper dimmability cannot be guaranteed for all kinds of 3rd party devices. Expected results of the driver(s) to be controlled can only be determined by testing in BubblyNet’s facilities.

  • Reverse Phase Dimming: ON/OFF For ELV Dimmable Light Sources
  • Line Input: 110 - 240VAC | 50/60Hz
  • Maximum: 200W
  • Auxiliary +24VDC Output: 100mA
  • Operating Temperature: -4° to 149°F (-20°C to 65°C)
  • Power Measurements: 0.03 to 10Amps. 2% accuracy
  • Wire Range: 18 - 22 AWG Wire, Solid or Stranded
  • Strip Length: 9mm Max
  • Dimensions: 5.25" x 1.5" x 1.25" (134 x 38 x 29mm)

The installation of the C-R00-11-DL00 Reverse Phase Controller is very simple. The two wires for VAC input are connected to the mains and the two wires for the VAC output are connected to the luminaire to be controlled. As soon as the device is powered up it will start broadcasting the non-provisioned advertising messages that will tell the provisioning app that a new device is ready to join. The provisioning app will connect to the new device, configure security keys, addresses and other data so the new bridge can join the Mesh Network. After the new device joins the mesh network it is ready to be configured (publishing / subscribing data.)

For best results, controllers need to be installed within 30 feet of the closest device within the Bluetooth® Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.