The C-T1C-24-DS00 is a Bluetooth Mesh Controller that converts any 0-10V device into a Bluetooth Mesh Node. It can be installed inside fixtures, j-boxes, inside its own UL listed enclosure or remoted. It can control a single or multiple 0-10V devices connected together.

The C-T2C-24-DS00 is a Bluetooth Controller that converts two 0-10V drivers into a Bluetooth Mesh Tunable White Node. It can be installed inside fixtures, j-boxes, inside its own UL listed enclosure or remoted. It controls two 0-10V drivers connected together.

The C-T20-17-DJ00 Load Controller is a wireless module that controls via Bluetooth any ON/OFF load up to 20 Amps. It can be installed outside of J-boxes through the standard opening according to electrical codes.

The DMX controller proper use is for architectural RGBW, Tunable White, static colors or transitions between scenes. Bluetooth Mesh is a wireless standard with focus on security and reliability. It is not intended for heavy loads of information broadcast. Entertainment applications such as pixels and video walls with fast and complex animations are not supported.

The C-F00-11-DL00 Forward Phase Controller is a wireless device that controls via Bluetooth mesh any line voltage load connected to it. It is a great solution to control decorative incandescent luminaries such as pendants and sconces. The Forward Phase Controller is the ideal solution for standalone projects as well as the backbone of complex Mesh Networks.

The C-R00-11-DL00 Reverse Phase Controller is a wireless device that controls via Bluetooth mesh any line voltage load connected to it. It is a great solution to control decorative LED luminaries such as pendants and sconces. The Reverse Phase Controller is the ideal solution for standalone projects as well as the backbone of complex Mesh Networks.

The C-S1C-24-DS00 Sensor Controller is a Bluetooth Mesh Bridge that converts any 12-24VDC Occupancy Sensor into a Bluetooth Mesh Node. It can be installed inside fixtures, j-boxes, or remoted. The non-bluetooth sensor can be added to any network with the addition of the Sensor Controller. The auxiliary 0-10V DC output can control a single or multiple 0-10V devices connected together.

The X-SF-024-DS00 Superfriend is a Bluetooth Mesh Bridge that increases retransmissions and strength of any Bluetooth Mesh network. It can be installed inside fixtures, j-boxes, or remoted.

Molded of rugged 0.065 inch thick polycarbonate, this wall plate resists scratching, denting or cracking.

Blank wireless dimming control (with included CR2032 battery) keypad in white.

Blank wireless dimming control (with included CR2032 battery) keypad in white.

Blank wireless dimming control (with included CR2032 battery) keypad in white.

Blank wireless dimming control (with included CR2032 battery) keypad in white.

Blank wireless dimming control (with included CR2032 battery) keypad in black.

Blank wireless dimming control (with included CR2032 battery) keypad in black.

Blank wireless dimming control (with included CR2032 battery) keypad in black.

Blank wireless dimming control (with included CR2032 battery) keypad in black.

The Daylight Sensor is a recessed, ceiling mounted Occupancy Sensor with a Photocell and Passive Infrared sensing capabilities. The sensor will automatically turn luminaires on to the dimming level necessary to reach the set level of light intensity with or without daylight.

The S-OC-W24-D000 is a wall mounted Bluetooth Mesh Qualified Occupancy Sensor with Passive Infrared and High Frequency Doppler occupancy sensing capabilities. The sensor will automatically turn luminaires on to the set dimming level when motion is detected and turn lights off after the area is vacated.

The S-OP-012-D0HB is a high ceiling, surface mounted Occupancy Sensor with Passive Infrared Sensor. The sensor will automatically turn on luminaires to the set dimming level when motion is detected and turn lights off automatically after the area is vacated. End users can program length of time delays, light level sensitivity, sensor range and other settings using the BubblyNet App.

The K-C3-UDS-00WH is a Wall Dimmer Switch with integrated Occupancy Sensor. Dimming and sensing functions are wireless but requires 110-277V connection to power device. Available in white with three faceplate color options.

The Occupancy Sensor is a recessed, ceiling mounted Sensor with Passive Infrared (PIR) sensing capabilities. The sensor will automatically turn luminaires on to the set dimming level when motion is detected and turn lights off after the area is vacated. End users can program length of time delays, light level sensitivity, sensor range and other settings using the BubblyNet App.

The Occupancy + Daylight Sensor is a recessed or trimless ceiling-mounted device that combines Passive Infrared (PIR) motion sensing with advanced daylight harvesting capabilities. This sensor is designed to automatically control lighting based on both motion detection and ambient light levels, providing energy-efficient illumination in indoor environments.

The D-C1K-30-42-17-DL00 drivers are the ideal solution for standalone projects as well as the backbone of complex Mesh Networks. The driver is programmable from 100mA up to 1000mA. Please contact BubblyNet Sales for more information

The driver is a wireless module that controls via Bluetooth any LED fixture into a smart wireless device and does not require the use of a gateway. These drivers are the ideal solution for standalone projects as well as the backbone of complex Mesh Networks. The driver is available from 100mA up to 1,000mA. Please contact BubblyNet Sales about optional housing and additional pricing.

The BubblyNet Drivers are the ideal solution for standalone projects as well as the backbone of complex Mesh Networks. Like two drivers in one, this dual-channel driver is programmable from 100mA up to 700mA and used for Tunable White applications. Please contact BubblyNet Sales for optional housing and pricing.

The drivers are the ideal solution for standalone projects as well as the backbone of complex Mesh Networks. Like two drivers in one, this dual channel driver is used for Tunable White applications.

The Tunable White driver is a wireless device that controls via Bluetooth a Tunable White fixture and does not require the use of a gateway.

The D-F70-07-20-24-D000 Constant Current drivers are the ideal solution for standalone projects as well as the backbone of complex Mesh Networks. Like four drivers in one, this quad channel driver is programmable up to 700mA and used for RGBW applications.

This is the ideal dimming driver for all constant voltage applications like LED strip lights, LED panels, and linear fixtures for up to 96W.

Use this driver for all constant voltage applications (LED strips, LED panels, linear fixtures) for up to 25W.

The D-V2K-00-48-17-DL00 Single Channel drivers are the ideal solution for standalone projects as well as the backbone of complex mesh networks.

The drivers are the ideal solution for standalone projects as well as the backbone of complex Mesh Networks. Like two drivers in one, this dual channel driver is used for Tunable White applications.

The D-G4K-00-24-24-DL00 Four Channel drivers are the ideal solution for standalone projects as well as the backbone of complex mesh networks. Use this driver for all constant voltage RGBW applications like LED strips, LED panels, linear fixtures for up to 96W.