High Bay Occupancy Sensor

S-OP-H12-DRWH

This is a high bay ceiling, surface mounted Occupancy Sensor with Photocell and Passive Infrared sensing capabilities with 35ft diameter as Max Detection Area.

The sensor will automatically turn on luminaires to the set dimming level when motion is detected and turn lights off automatically after the area is vacated. End users can program length of time delays, light level sensitivity, sensor range and other settings using the BubblyNet App.

Oops, that's an error. Try refreshing

For more information please open this page in the HubSpot page editor.

Product Option Table

This product has no options.

Login to HubSpot to get started.

Login or contact sales to view pricing.

Technical Description

The High Bay Photocell + Occupancy Sensor uses digital PIR Motion Detector Architecture and Dual Element passive infrared (PIR) technology for improved detection coverage for high ceiling mount applications up to 40 feet. The High Bay Photocell + Occupancy Sensor is a Class 2 Device designed to satisfy new CA Title 24 requirements for bi-level dimming of lighting fixtures.

The sensor is capable of dimming lighting loads down to any level the user defines. The sensor is suitable for a variety of indoor applications. It supports ceiling mounts up to 40 feet high. Both sensor and transformer are rated for use in temperatures ranging from 22°F to 158°F (-30° to 70°C) and relative humidity from 90 to 95% at 86° (30°C.) *for dim to off, transformer or LED dimming driver capable of dimming to off is required.

  • Sensor Type: PIR Occupancy Sensor
  • Input Voltage | Current Consumption: 12-24VDC | 25mA Sensor (50mA w/Bluetooth® Low Energy)
  • Mounting Height: Ceiling mount up to 40' (12.2m)
  • Max Detection Area* (see spec sheet for details): 35' Diameter (10.6m) \ 360° Coverage Pattern
  • Photocell Sensitivity: 30 Lux to Daylight
  • Operating Temperature: 22°F to 158°F (-30°C to 70°C)
  • Storage Temperature: -40°F to 176°F (-40°C to 80°C)
  • Relative Humidity: 90-95% non-condensing at 30°C
  • Mounting: Surface
  • Dimensions: 3.66” diameter (93 mm)
  • Trim Color: White
  • Warranty: 2 Years

12-24VDC power needs to be supplied to the sensor, either with one AC/DC transformer or with the auxiliary DC output of a BubblyNet Controller, not included.

For best results, sensors need to be installed within 30 feet of the closest device within the Bluetooth® Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.