DMX Controller
C-X4C-24-DS00
The DMX C-X4C Controller is an ideal device for architectural RGBW, Tunable White, static colors or transitions and animations between scenes.
It is not intended for heavy loads of information broadcast. Entertainment applications such as pixels and video walls with fast and complex animations are not supported.
Oops, that's an error. Try refreshing
For more information please open this page in the HubSpot page editor.Login or contact sales to view pricing.
Technical Description
The DMX Controller can control up to four DMX channels (slots) making it an ideal partner for RGBW, RGB+W, TN + TW, applications with BubblyNet color-picker compatible 4-channel control. The DMX is powered by a 12-24 VDC Class 2 power supply and provides a DMX-512 control, relay output, and sensor input. Different BubblyNet enabled products can be used from a simple one luminaire direct control to a complete and full featured light control system where thousands of units form automatically an intelligent mesh network. The DMX Controller can be controlled with the BubblyNet App which can be downloaded free of charge from Apple App Store and Google Play Store. Relay output and sensor input is included.
- DC Input Voltage: 12-24 VDC
- No-Load Input Current: 30 mA
- Aux-Relay Control Output: 12 - 24 VDC, Same as Input
- Max Output Current: 100mA
- Aux-Sensor Input Voltage: Max 24 VDC
- Operating Temperature: -13° to 113°F (-25° to 45°C)
- Max Relative Humidity: 80% Non-Condensing
- Wire Range: 0.5 - 1.5 mm, 14 - 22 AWG
- Strip Length: .25” (6 - 7)
- Dimensions: 2.2” x 1.2” x 0.7"
BubblyNet uses mesh network technology so each DMX Controller acts also as a repeater. When testing the network, it is important to test that each unit can be controlled from any point of the network covered area. Connect a Class 2 power supply with 12-24 VDC output voltage to the input connector of the DMX Controller. Make sure not to use a constant current LED driver and that the cable polarity is correct. Connect the DMX wires accordingly. The DMX Controller is an ETL Listed Open-Type device which means that it will have to be used together with a Class 2 power supply with maximum output power of 100 VA. The product can be installed outside of a junction box. Make sure to comply with National Electric Code in installation and when selecting installation wires.
For best results, controllers need to be installed within 30 feet of the closest device within the Bluetooth® Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.