1CH DRIVER CC 26W AC/DC 700mA MAX
D-C70-30-42-17-D000
The 26 W Max CC Single Channel Driver is a wireless module that controls via Bluetooth® any LED fixture and transforms it into a smart wireless device.
Oops, that's an error. Try refreshing
For more information please open this page in the HubSpot page editor.Login or contact sales to view pricing.
Technical Description
The 0-10V driver is a wireless module that controls via Bluetooth® any 0-10V driver, power unit or device. It transforms any 0-10V device into a smart wireless device and does not require the use of a gateway. These drivers operate on 110-277VAC. Once powered up, the device broadcasts its identification code waiting to be commissioned through the Bubblynet App.
- Input Voltage: 110 - 277VAC | 50-60Hz
- Output Current: 100mA - 700mA
- DC Output Voltage: 30-44VDC
- Operating Temperature: 14° to 104°F (-10° to 40°C)
- Suited For: 9W, 13W, 18W, or 26W Fixtures
- IP Rating: IP 20 - Dry Locations
- Dimensions: 3.54” x 1.7” x 1.36” (90 x 43 x 32 mm)
- Optional Housing Dimensions: 6” X 1.38” X 1.89” (152.4 x 35 x 48.01mm)
The installation of these drivers is very simple. The two wires for universal AC input are connected to the driver. As soon as the driver is powered on it will start broadcasting the non-provisioned advertising messages that will tell the provisioning app that a new device is ready to join.
The provisioning app will connect to the new driver, configure security keys, addresses and other data so the new driver can join the Mesh Network. After the new driver joins the Mesh Network it is ready to be configured (publishing / subscribing data.)
For best results, drivers need to be installed within 30 feet of the closest device within the Bluetooth® Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.