1CH 0-10V Controller with Relay
C-T1C-11-DL00
The Single Channel Controller with Relay is a Bluetooth® Mesh qualified device that converts any 0-10V device into a Bluetooth® Mesh Node.
It can be installed inside fixtures, j-boxes, inside its own UL listed enclosure or remoted. It can control a single or multiple 0-10V devices connected together.
Oops, that's an error. Try refreshing
For more information please open this page in the HubSpot page editor.Login or contact sales to view pricing.
Technical Description
The 0-10V Controller is a wireless module that controls via Bluetooth® any 0-10V driver, motorized blinds, power unit or other devices. It transforms any 0-10V device into a smart wireless device and does not require the use of a gateway.
- AC Input Voltage: 110-277VAC | 50/60Hz
- Output Relay: 110-277VAC | 50/60Hz
- Output DC: 0-10VDC
- LED Load: 200W Max
- 0-10V Dimming: 100mA Max
- Auxiliary +24VDC Output: 100mA
- Operating Temperature: -4° to 149°F (-20° to 65°C)
- Wire Range: 18 - 22 AWG Wire, Solid or Stranded
- Strip Length: 9mm Max
- Dimensions: 5.125” x 1.5” x 1.125” (134 x 38 x 29 mm)
The C-T1C-11-DL00 operates on 110-277V. Once powered up, the device broadcasts its identification code waiting to be provisioned through the BubblyNet App. The C-T1C-11-DL00 is a Bluetooth® Mesh Qualified device. This means that it can be controlled and be part of any Bluetooth® Mesh Network, independently of the brand or manufacturer of the additional devices or controls. The Single Channel Controller with Relay is a Bluetooth® Mesh qualified device. This means that it can be controlled and be part of any Bluetooth® Mesh Network, independently of the brand or manufacturer of the additional devices or controls.
The dimming performance of the 0-10 Controller depends on dimmability of 3rd party 0-10V driver. Expected results of the driver(s) to be controlled can only be determined by testing in BubblyNet’s facilities.
The installation of the C-T1C-11-DL00 is very simple. The two wires for universal AC output are connected to the luminaire and two wires for 0-10V output are connected to the 0-10V input device. 24V auxiliary output can be used to power sensors, Q Series Switches, and other low voltage devices.
As soon as the Controller is powered on through the AC input it will start broadcasting the non-provisioned advertising messages that will tell the provisioning app that a new device is ready to join. The provisioning app will connect to the new driver, configure security keys, addresses and other data so the new Controller can join the mesh network. After the new Controller joins the mesh network it is ready to be configured (publishing / subscribing data.)
For best results, controllers need to be installed within 30 feet of the closest device within the Bluetooth® Mesh network. Signal strength significantly decreases in presence of metal barriers such as when devices are enclosed in metal boxes.