2 Channel, 0-10V Tuneable White Bridge
The B-0T-B24-DS00 is a Bluetooth Bridge that converts two 0-10V drivers into a Bluetooth Mesh Tuneable White Node. It can be installed inside fixtures, j-boxes, inside its own UL listed enclosure or remoted. It controls two 0-10V drivers connected together.
The 0-10V Bridge is a wireless module that controls via Bluetooth 0-10V drivers. It transforms any 0-10V device into a smart wireless device and does not require the use of a gateway.
|DC Input Voltage||12-24VDC|
|DC Output Voltage||0-10VDC x 2 Channels|
|Operating Temperature||4° to 140°F (-10°C to 60°C)|
|Dimensions||3.25” x 1.5” x 0.875” (82.5 x 438 x 22 mm)|
The B-0T-B24-DS00 operates on 12-24VDC. Each of the two channels control independently a 0-10V driver. The two channels are used to mix different light sources for Tunable White applications. Once powered up, the device broadcasts its identification code waiting to be commissioned through the Bubblynet App. The B-0T-B24-DS00 is a Bluetooth Mesh Qualified device. This means that it can be controlled and be part of any Bluetooth Mesh Network, independently of the brand or manufacturer of the additional devices or controls. The installation of the B-0T-B24-DS00 is very simple. The two wires for DC input are connected to a DC power supply and 2 + 2 wires for 0-10V output are connected to the 0-10V drivers. As soon as the bridge is powered on it will start broadcasting the non-provisioned advertising messages that will tell the provisioning app that a new device is ready to join. The provisioning app will connect to the new driver, configure security keys, addresses and other data so the new bridge can join the Mesh Network. After the new bridge joins the Mesh Network it is ready to be configured (publishing / subscribing data.)