A BubblyNet solution

2 channels, 0 to 10V Bridge - B-0T-B12-D0E0

The 0 to 10V Bridge is a wireless module that controls via Bluetooth any 0-10V driver, power unit or device. It transforms any 0-10V device into a smart wireless device and does not require the use of a gateway.

Technical description

Wireless 2.4 GHz interface. Device firmware can be updated over-the-air.

Output Current (programmable) 100mA-700mA
Input 110 - 277 VAC 50-60Hz
Output 0-10VDC x 2 channels
Protections Over Current, Short Circuit and Over Temperature
Operation Temperature -10ºC to 60ºC

The use of the bridge is very simple: plug and play. It has two cables for universal AC input and two cables for DC output to the LED driver / 0 to 10V device. As soon as the bridge is powered on it will start broadcasting the non-provisioned advertising messages that will tell the provisioning app that a new device is ready to join. The provisioning App will connect to the new driver, configure security keys, addresses and other data so the new bridge can join the Mesh network. After the new bridge joins the Mesh network it is ready to be configured (publishing / subscribing data.)